RIDGID 66497 K-60SP-SE Sectional Machine, Sectional Sewer Machine with A-61 Auger Tool Kit and A-62 Drain Cable Kit, Drain Cleaner Machine

CSA approved. Approved to UL standards (NRTLC).

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

The compact drain snake machine for institutional, commercial or residential cleaning is ideal for septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages. The K-60SP-SE has a small footprint making it easy to store or transport in a van, and the rear handle and cable sections make it easy to carry up a ladder.

Adjustment knob allows easy change-out of the cable and increases capacity and versatility pushing either 7/8-inch C-10 cable for 2 to 4 inch lines through 150 feet (Included) or 5/8-inch C-7, C-8, or C-9 cable to clean 1-1/4 to 4-inch lines up to 125 feet (Not Included).

Includes: RIDGID K-60SP compact sectional drain cleaning machine, A-1 left-hand drain cleaning mitt, A-12 pin key, A-60-12 rear guide hose, A-61 Standard Equipment Tool Kit for K-60-SE (includes: T-101 Straight Auger, T-102 Funnel Auger, T-107 Spade Cutter, T-125 Retrieving Auger, T-150-1 Sharktooth Cutter, and A-3 Tool Box), A-62 Standard Equipment Cable Kit for K-60-SE (includes: Five Sections C-10, 7⁄8-inch (22 mm) x 15-foot (4,6 m) Cable and A-8 Cable Carrier), and operator’s manual.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

• Ideal for septic tank vacuum truck operators, rooftops, and other institutional, commercial or residential cleaning
• Small footprint for storage or transport and with the rear handle allowing for easy transport up ladders it’s ideal for rooftop vent stacks
• Remove only two bolts for access to belt drive access or jaw set for cleaning or replacement
• Drain cleaning machine is equipped with a powerful 1/2 HP motor driving the drain cleaning cable at 600 RPM controlled with clutch handle and For/Off/Rev toggle switch
• Sectional drain machine includes the A-62 Cable Kit of C-10 7/8-inch (22 mm) drain snake cable to clean 2-inch to 4-inch (50 mm to 100 mm) lines through 150-feet (45.7 m)