2 Pack – Enchantech Kaipule Z-Wave Window & Door Sensor

Integrates into any existing standard z-wave network with ease.

Item contents:

1. 2x Window/Door Sensor (main unit + sensor)
2. 4x AAA Batteries
3. 2x Large 3M Double Stick Tape (main unit)
4. 2x Small 3M Double Stick Tape (sensor)
5. 2x Drill Mounting Kits (4x screws + 4x anchors)
6. 2x Instruction Manual

Pairing/Removal instructions:

1. Select to add/delete a window/door sensor on your z-wave controller.
2. Press and release the tamper switch inside the unit 3 times in 1.5 seconds.
3. Verify the LED stops blinking when registration is complete.

Approximate operating range from hub: 100ft (30m)

A red light on the unit will indicate each time the unit is activated.

NOTE: An existing z-wave hub operating on the 868.4MHZ/908.4MHZ range is required (not included).

Features

• Monitor your windows and doors from home or away using z-wave technology.
• Surface mount design for easy installation. Double Stick Tape and Mounting Kit included.
• Two complete units, including mounting hardware.
• Common Battery Design – Each unit requires 2 AAA batteries (Included)
• Tamper safe – Tamper switch triggers if unit is opened.